Grass-valley iTX Output Server 2 v.2.6 Manual do Utilizador descarregar pdf (Página 38)

Output Server 2 Channel Configuration

Selecting the Channel Resolution and Frame Rate

The resolution and frame rate for a channel is configured from the Channel tab of the

Output Server 2 user interface.

Note: If you are not using an external reference input into your SDI I/O card,

you must set the Reference and Frame Rate Family for the channel from the

I/O Device Controller user interface, otherwise Output Server 2 will start up

in an error state. See V

iewing the Output Server 2 Engineering Panel on

page 63.

To configure the Resolution and Frame Rate for an Output Server 2 channel:

1 Open the Output Server 2 user interface for

the channel you want to configure, as

described in Accessing the Output Server 2 User Interface, on

page 31.

2Go to Co

nfiguration > Channel tab.

The channel configuration options appear. The R

esolution and Frame Rate controls are

on the top left of the window.

3 Specify the Resolution (e.g. 720p) for the channel using the drop-down list.

4The Fra

me Rate is determined by the Frame Rate Family setting I/O Device Controller

configuration and cannot be changed from Output Server 2.

5Click S

ave to store your changes and automatically reboot the Output Server 2 service.

Alternatively, wait until you have finished making changes in other areas of the

onfiguration panel, then click Save.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 74 75

Sem comentários

Grass-valley iTX Output Server 2 v.2.6 Manual do Utilizador Página 38